3D Print Guide - Deluxe D:I-AE Insert
Table of Contents
- What's Included
- Filament Information
- 3MF Print Settings
- STL Print Settings
- Additional Materials
What's Included
PDF Files (3)
- Box Lid Insert - DDI-AE.pdf
- Note: This can be placed by itself or within a sheet protector and attached with double-sided tape to the inside of the box lid.
- Agent/Alliance Printable Sticker.pdf
- Note: This can be printed or sticker or regular paper and attached with double-sided tape, glue stick, etc.
- 3D Print Guide - DDI-AE.pdf
- This is this guide, only in PDF form.
3MF Files (1)
- DeluxeDuneImperium-AllExpansions-PIY.3mf
- Note: This 3MF was created in BambuStudio, it is understood that files created within Bambu Studio sometimes have problems. Alternatively you can create your own with the STLs provided. You will find the quantity needed of each along with any specific print settings.
STL Files (30)
- agentAlliance.stl
- agentStorage.stl
- agentStorage_lid.stl
- cardDisplay.stl
- houseHagelCards.stl
- imperiumCards.stl
- intrigueConflictTechContracts.stl
- leaderStorage.stl
- leaderStorage_lid.stl
- playerBoard_left.stl
- playerBoard_right.stl
- playerComponents.stl
- playerComponents_lid.stl
- resourceTray.stl
- resourceTray_lid.stl
- sixPlayerComponents.stl
- uprisingBloodlines.stl
- uprisingBloodlines_lid.stl
- contracts_divider_left.stl
- contracts_divider_right.stl
- imperiumCards_divider_center.stl
- imperiumCards_divider_left.stl
- imperiumCards_divider_right.stl
- intrigueConflict_divider_left.stl
- intrigueConflict_divider_right.stl
- leaderStorage_divider_center.stl
- leaderStorage_divider_left.stl
- leaderStorage_divider_right.stl
- techTiles_divider_left.stl
- techTiles_divider_right.stl
LBX Files (18)
- 34_arrakis.lbx
- 34_base.lbx
- 34_bloodlines.lbx
- 34_deVries.lbx
- 34_foldspace.lbx
- 34_immortality.lbx
- 34_prepareTheWay.lbx
- 34_riseOfIx.lbx
- 34_spiceBase.lbx
- 34_spaceUprising.lbx
- 34_tlielaxu.lbx
- 34_uprising.lbx
- 34_yrkoon.lbx
- 48_base.lbx
- 48_bloodlines.lbx
- 48_instructions.lbx
- 48_riseOfIx.lbx
- 48_uprising.lbx
Filament Information
Below are the type and amount of filament used in the photos/videos shown. The amount includes the filament flush amount when using a Bambu AMS. Total time to print with a Bambu P1S with AMS is approximately 44 hours.
| Filament | Color | Amt (g) | Notes |
| Bambu PLA Matte | Charcoal | 1784.59 | Used for the majority of the insert. |
| Bambu PLA Matte | Dark Red | 206.76 | Used for the Uprising/Bloodlines components as well as the Six Player Components. |
| Bambu PLA Matte | Sky Blue | 1.15 | Used in the Resource Tray Lid (water). |
| Bambu PLA Matte | Mandarin Orange | 1.2 | Used in the Resource Tray Lid (spice). |
| Bambu PLA Matte | Ash Grey | 2.67 |
Used in the Resource Tray Lid (Solari and text). |
| Bambu PLA Basic | Gold | 3.52 |
Used in the Player Components Lid, Leader-Specific Components Lid, and the Agents/Alliance Tokens Lid. |
| Bambu PLA Basic | Blue | 2.88 |
Used in the Player Components Lid. |
| Bambu PLA Basic | Maroon Red | 2.88 |
Used in the Player Components Lid. |
| Bambu PLA Basic | Mistletoe Green | 2.88 |
Used in the Player Components LId. |
3MF Print Settings
Global:
Bed Size: 256x256mm
Nozzle: 0.4mm
Layer Height: 0.2mm
Sparse Infill Density: 15% (could be lower to save on filament)
X-Y Hole Compensation: 0.1 (note, this function is not available for multi-color prints in Bambu Studio)
| Plate Name | Plate | Print Settings |
| playerBoard-Left_10-displays | 1 | |
| agentAlliance_playerBoard-Left_2-displays | 2 | |
| leaderStorage_playerBoard-Left | 3 | |
| 2-playerComponents_playerBoard-Left | 4 | |
| 2-playerComponents_playerBoard-Right | 5 | |
| 1-resourceTray_playerBoard-Right | 6 | Support recommended for resourceTray. |
| 1-resourceTray_playerBoard-Right | 7 | Support recommended for resourceTray. |
| imperium_playerBoard-Right | 8 | |
| houseHagel_intrigueConflict | 9 | |
| uprisingBloodlines_uprisingBloodlinesLId | 10 | Different filament color (optional). For printers with AMS capabilities, lid text is painted on the side facing build plate. |
| sixPlayerComponents | 11 | Different filament color (optional). |
| resourceLId | 12 | For printers with AMS capabilities, lid text is painted on side facing build plate (Text=Gray Water=Blue, Solari=Gray, Spice=Orange). |
| playerComponets-lids | 13 |
For printers with AMS capabilities, each lid is printed on side facing the build plate, with the player colors, Red, Blue, and Green. Plate settings: |
| leaderSpecific_playerComponents-lid_agentAlliance-lid | 14 | For printers with AMS capabilities, each lid is painted on the side facing the build plate in a gold/yellow color (optional). |
| imperiumHouseHagel-dividers | 15 | Recommend printing on a smooth build plate. |
| imperiumHouseHagel_dividers | 16 | Recommend printing on a smooth build plate. |
| imperiumHouseHagel_dividers | 17 | Recommend printing on a smooth build plate. |
| intrigueConflict_dividers | 18 | Recommend printing on a smooth build plate. |
| leaderCenter_dividers | 19 | Recommend printing on a smooth build plate. |
| leaderLeft-dividers | 20 | Recommend printing on a smooth build plate. |
| leaderRight-dividers | 21 | Recommend printing on a smooth build plate. |
STL Print Settings
| Part | Qty | Print Settings |
| imperiumCards.stl | 1 | |
| houseHagel.stl | 1 | |
| leaderStorage.stl | 1 | X-Y Hole Compensation 0.1mm |
| leaderStoraage_lid.stl | 1 | Lid text is painted on side facing build plate. Paint text color of your choice (suggestion: yellow/gold). For printers without AMS capabilities, we recommend adding pauses to change out filament. |
| sixPlayerComponents.stl | 1 | |
| resourceTray | 2 | Support recommended. |
| resourceTrayLid | 1 | Lid text and images are painted on side facing build plate in the color(s) of your choice. For printers without AMS capabilities, we recommend printing text and images in one color and adding pauses as necessary to change out filament. |
| uprisingBloodlines.stl | 1 | We printed this in red to differentiate the separate game/expansion. |
| uprisingBloodlines_lid.stl | 1 | Lid text is painted on side facing the build plate. Paint text the color of your choice. For printers without AMS capabilities, we suggest adding pauses to change out the filament. |
| intrigueconflictTechContracts.stl | 1 | |
| agentAlliance.stl | 1 | |
| agentAlliance_lid.stl | 1 | Lid text is painted on side facing build plate. Paint text the color of your choice. For printers without AMS capabilities, we suggest adding pauses to change out filament. |
| playerComponents.stl | 4 | |
| playerComponents_lid.stl | 4 | Lid text is painted on side facing build plate. Paint text the color of your choice (player colors) for each lid. For printers without AMS capabilities, we suggest printing one at a time adding pauses where necessary. |
| playerBoard-left.stl | 4 | X-Y Hole Compensation: 0.1 |
| playerBoard-right.stl | 4 | X-Y Hole Compensation: 0.1 |
| cardDisplays | 12 | X-Y Hole Compensation: 0.1 |
| techDivider-left.stl | 1 | Recommend printing on a smooth build plate. |
| techDivider-right.stl | 1 | Recommend printing on a smooth build plate. |
| contractDivider-left.stl | 2 | Recommend printing on a smooth build plate. |
| contractDivider-right.stl | 1 | Recommend printing on a smooth build plate. |
| intrigueConflict-left.stl | 4 | Recommend printing on a smooth build plate. |
| intrigueConflict-right.stl | 3 | Recommend printing on a smooth build plate. |
| imperiumDivider-center.stl | 6 | Recommend printing on a smooth build plate. |
| imperiumDivider-left.stl | 6 | Recommend printing on a smooth build plate. |
| imperiumDivider-right.stl | 4 | Recommend printing on a smooth build plate. |
| leaderDivider-left.stl | 2 | Recommend printing on a smooth build plate. |
| leaderDivider-center.stl | 2 | Recommend printing on a smooth build plate. |
| leaderDivider-right.stl | 1 | Recommend printing on a smooth build plate. |
Magnets
- 3x2mm magnets - 78 total
| Part | Qty |
| Player boards (x4) | 24 |
| Card displays (x12) | 48 |
| Leaders | 6 |
Labels
For compatible labels and label makers/printers, please see the section "Compatible Label Makers/Printers".
By Component
| Component | Size | Label |
| Imperium Deck | 34 | Base |
| Rise of Ix | ||
| Immortality | ||
| Uprising | ||
| Bloodlines | ||
| Arrakis | ||
| Spice | ||
| Foldspace | ||
| Prepare | ||
| Spice (Up) | ||
| Tleilaxu | ||
| House Hagel | 34 | Base |
| Rise of Ix | ||
| Immortality | ||
| Uprising | ||
| Bloodlines | ||
| Intrigue/Conflict | 34 | Base |
| Rise of Ix | ||
| Immortality | ||
| Uprising | ||
| Bloodlines | ||
| Leader-Specfiic | 34 | Y'rkoon |
| De Vries | ||
| Contracts | 34 | Uprising |
| Bloodlines | ||
| Rise of Ix | ||
| Tech Tiles | 34 | Rise of Ix |
| Bloodlines | ||
| Leaders | 48 | Base |
| Rise of Ix | ||
| Uprising | ||
| Bloodlines | ||
| Instructions |
By Label
| Label | Qty |
| 34_Arrakis | 1 |
| 34_base | 3 |
| 34_bloodlines | 5 |
| 34_deVries | 1 |
| 34_foldspace | 1 |
| 34_immortality | 1 |
| 34_prepareTheWay | 1 |
| 34_riseOfIx | 5 |
| 34_spiceBase | 1 |
| 34_spiceUprising | 1 |
| 34_tleilaxu | 1 |
| 34_uprising | 4 |
| 34_y'rkoon | 1 |
| 48_base | 1 |
| 48_bloodlines | 1 |
| 48_instructions | 1 |
| 48_riseOfIx | 1 |
| 48_uprising | 1 |
Compatible Label Makers/Printers
6mm Labels (White on Black)
The actual TZe required from Brother are hard to find. But here is a reasonable alternative option (affiliate link):
LBX Compatible
A printer compatible with the P-Touch Editor Software is required to print the label files included. See some compatible models below (affiliate links):
6mm Compatible
These are not compatible with the P-Touch Editor software but can print 6mm labels designed to fit on the dividers. You will have to create the labels yourself.